Traditional power transformers have the risk of oil leakage and fire, and their maintenance costs are extremely high, causing great headaches. Our 10kV SC13 dry-type transformer uses epoxy resin casting technology and can operate stably without the need for insulating oil. The actual measurement data shows that energy consumption is reduced by 15%, and the failure rate is decreased by 60%. It is particularly suitable for places with high safety requirements such as schools, hospitals, and commercial centers, and can be perfectly combined with various Box Type Substations.

Four Core Advantages

• Fully enclosed insulation design, completely eliminating the risk of oil leakage

• H-level insulation materials, with a temperature rating of 180℃

• Energy-saving silicon steel sheets, with a no-load loss lower than the national standard by 20%

• Intelligent temperature control system, automatically starting and stopping the cooling fan

Maintenance Tips

• Clear the dust in the heat dissipation airway every six months

• Regularly check and tighten the connecting bolts

• Maintain a ventilated and dry installation environment

• It is recommended to conduct infrared thermal imaging detection annuall

Frequently Asked Questions Answered

Question: What are the advantages compared to oil-immersed transformers? Answer: Compared to Oil Immersed Transformer, it eliminates the steps of oil testing and replacement, reducing maintenance costs by 40%.

Question: What is the protection level?

Answer: It meets the IP54 protection standard, effectively preventing dust and water.

Question: Will it produce toxic gases?

Answer: Using environmentally friendly materials, even if overheated, it will not produce toxic gases.

Question: How long is the service life?

Answer: The design life is 30 years, and the main components have a warranty of 20 years.

Question: What is the noise level?

Answer: It adopts a shock-absorbing design, with operating noise lower than 55 decibels.

Question: What is the response time for after-sales service?

Answer: There are 200 service outlets across the country, and technicians will arrive within 24 hours.

A tertiary hospital that replaced it saved 120,000 yuan in maintenance costs annually.

Please note:

During installation, sufficient cooling space should be reserved, and the distance from the wall should be recommended to be more than 80 cm. Existing users have reported that in the humid coastal areas, there have been no insulation failures for five years, verifying the reliability of the product. All products undergo sudden short-circuit tests before leaving the factory and fully comply with the GB1094.11 national standard.