To be honest, have you ever taken a close look at that old transformer in the factory? It just keeps buzzing and spinning all day long, and the electricity meter keeps turning slowly. In the industry, it's well-known that the no-load loss of the old Oil Immersed Transformer is shockingly high. The electricity wasted in a year is enough to power the entire factory for half a year. Looking at the electricity bill, you can't help but wonder: No new equipment was added, why did the electricity cost not decrease? The problem lies not with the machine, but with the transformer itself. Our solution is straightforward: Replace it with the HuaLai Power SCBH15 Amorphous Alloy Dry-type Transformer, a 100kVA copper coil model. This Amorphous Alloy Dry-type Transformer has an ultra-thin non-ferrous alloy core, resulting in a significantly lower no-load loss compared to the old silicon steel sheet. The benefits are clear: no oil consumption, no leakage, no fire. All the troubles like oil reservoirs, breathing apparatuses, and regular oil changes are eliminated. The effect? Within the first month of installation, you can see the changes on the electricity bill. The oppressive heat in the transformer room disappears, and even the inspection workers are willing to stay a little longer when passing by.
This transformer not only saves electricity, but also has a solid current-carrying capacity for the copper coil. It can withstand a short-term overload of 120% without any problem. The start-up shock of the motor is nothing to worry about. If you install it in a Box Type Substation or connect it to an existing High and Low Voltage Distribution Cabinet, the size is in accordance with national standards. Electricians can directly connect without modifying the cabinet. Nowadays, with the continuous emergence of photovoltaic projects, it is perfectly suitable to install it in a Photovoltaic Prefabricated Cabin. The shell has been treated with three-layer anti-corrosion paint, preventing moisture and dust from entering. In essence, it is monitoring every watt of electricity for you, ensuring that the electricity cost is spent wisely.
In practice, the ease of use of this equipment exceeds expectations. The old oil transformer needs to measure the insulation oil pressure when it rains. This Dry Type Transformer is epoxy resin fully poured, with the coils fully sealed. If it gets dirty, just blow it with an air gun and it's done. Its moisture-proof performance is several streets ahead of the oil transformer. It comes with a temperature controller that monitors the winding temperature in real time. If it gets too hot, it will first alarm and then trip. There's no need for someone to stand guard 24 hours a day. Some people think it has a higher initial investment, but if you calculate the cost: the electricity saved in a year recovers the difference, and you'll make a profit for the next 10-15 years. Moreover, HuaLai Power's annealing process is well-controlled, and the operating noise is just audible, making it not disturbing at night.
Product features, three sufficient points:
1.Amorphous alloy core + pure copper coil, the no-load loss is only one-third of that of ordinary silicon steel transformers.
2.Epoxy resin vacuum pouring, flame-retardant and self-extinguishing, no oil or pollution, fire acceptance is a breeze.
3.100kVA with intelligent temperature control, over-temperature alarm and trip, condensation heater automatically starts.
Tips, two points to remember:
1.The 5mm thick rubber base pad, which is 5mm thick, reduces vibration and noise immediately. Don't skimp on this.
2.Use an infrared temperature gun to scan the inlet and outlet terminals once a quarter. If the temperature difference exceeds 10℃, tighten the screws.
